BFHYF - 742106 ENAMEL,ALKYD,GLOSS RED 11105

  • MSDS: BFHYF
  • Manufacturer: PRATT AND LAMBERT
  • Product Name: 742106 ENAMEL,ALKYD,GLOSS RED 11105
  • National Stock Number: 8010-00-616-7486
Product Identification

Product ID:742106 ENAMEL,ALKYD,GLOSS RED 11105
MSDS Date:01/01/1985
FSC:8010
NIIN:00-616-7486
MSDS Number: BFHYF

Responsible Party
PRATT & LAMBERT

Emergency Phone: 316-733-1361

Cage: PRATT

Contractor
PRATT AND LAMBERT INC
2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

MINERAL SPIRITS

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 60%

ACGIH TLV: 500PPM


MOLYBATE ORANGE

CAS: 12656-85-8

RTECS: QA4660000

Fraction By Weight: <5%


METHYL ETHYL KETOXIME

RTECS: PM7783000

Fraction By Weight: <0.5%

Hazards

Effects of Overexposure:INHAL:ANESTH.IRRIT OF NOSE, THROAT, EYES & POSS
DIZZ & NAUSEA.SPRAY MISTS CONTN LEAD.LEAD POISON(SUP

First Aid

First Aid:INHAL:REMOV FR EXPOSR & PROVIDE FRESH AIR.SPLASH EYES:FLUSH
IMMED. W/LG AMTS. OF WATR F/15 MIN.SPLASH SKIN:REMOV CONTAM CLOTH &
WASH ALL AFFECT AREA W/WATR.INGEST:DO NOT INDUCE VOMITING. CONSULT
A PHY SC. IMMED IN ALL CASES.

Fire Fighting

Flash Point:104F 40C TCC
Extinguishing Media:CO*2,DRY CHEM OR ALCOL FOAM,POLYMR FOAM PREFER F/LG
FIRES.
Fire Fighting Procedures:SELF-CONTND BREATHING APPARATUS SHLD BE AVAIL
F/FIREMEN.
Unusual Fire/Explosion Hazard:KEEP CONTNRS TIGHTLY CLOS.ISOLAT FR
HEAT,ELECTR EQPMT,SPARK & OPN FLAME.CLOS CONTNRS MAY EXPLOD(SUP)

Accidental Release

Spill Release Procedures:REMOV ALL SOURCES OF IGNITION(FLAMES,HOT
SURFACES, & ELECTR STATIC OR FRICTIONAL SPARKS).VENTILATE AREA &
AVOID BREATHING VAPORS. REMOV W/INERT ABSORB & NON-SPARKING
TOOLS.STEPS MUST BE TAKN TO PREVNT CONTAMINAT OF GROUND WATR OR
STREAMS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LG
QUANTITIES IN COMPLIANCE W/OSHA 1910.106. CONTNRS SHLD BE GROUNDED
& BONDED TO THE RECEIVING CONTAINER.
Other Precautions:DO NOT CUT OR WELD ON EMPTY CONTNRS.DO NOT USE UNTIL
ALL SAFETY PRECAUTIONS HAVE BEEN READ & FULLY UNDERSTOOD BY THE
USER.

Exposure Controls

Respiratory Protection:APPRVD MECHAN RESPIRAT TO REMOV OVRSPRA WHN
SPRAY OUTDR OR OPEN AREA
Ventilation:PROVID GEN DILUT/LOC EXHAUST,VENTILAT IN VOL TO KP BELO
TLV.
Protective Gloves:SOLVNT IMPERMBL
Eye Protection:SAFETY EYEWR AGNST SPLASH
Other Protective Equipment:TO PRVENT SKIN CONTCT.SEE OSHA STD FOR
OCCUPAT EXPOSR TO LEA
Supplemental Safety and Health
UNUS. FIRE/EXPLOS. HAZ:WHEN EXPOSED TO EXTREME HEAT.DO NOT APPLY TO
VERY HOT SURFACES. EFFECT OF OVEREXPOSR:IS CHARACTERIZED BY
HDACH,DIZZ,STAGGERING GAIT,CONFUSION,UNCONSCIOUSNESS OR COMA.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:311-373F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:62

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTCT W/STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID FIRES,HEAT & HOT SURFACES.
Hazardous Decomposition Products:BURNING WILL PRODUCE SMOKE & OXIDES OF
CARBON & LEAD.
Conditions to Avoid Polymerization:DO NOT ADD DRIERS OR REACTIVE CHEMS
W/O TECH SUPERVISION.

Disposal

Waste Disposal Methods:DISPOSE IN ACCORD W/LOCAL, STATE & FED.
REGULATIONS. INCINERATE IN EPA APPRVD FACILITY. DO NOT INCINERATE
CLOSED CONTNRS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.